DTU Cutoff 2026: Branch-Wise JEE Main Closing Ranks, Categories, Delhi & Outside Delhi
DTU Cutoff 2026: Delhi Technological University B.Tech admission is conducted through JAC Delhi counselling on the basis of JEE Main ranks. In JAC Delhi 2026 Round 4, the DTU CSE closing rank shown for the Delhi Region General category was 14,806, while for the Outside Delhi Region General category it was 7,060. Other branches had different closing ranks depending on category, region, seat availability and counselling round. Students can check the latest official DTU cutoff on the JAC Delhi website.
DTU Cutoff 2026 is one of the most searched admission-related topics among students seeking B.Tech admission to Delhi Technological University. The cutoff is released through JAC Delhi counselling and is based on the candidate's JEE Main rank, category, region, branch preference, and seat availability.
For the 2026-27 admission cycle, JAC Delhi has published official DTU opening and closing rank information for different counselling rounds. The Round 4 cutoff, for example, is based on JEE Main All India Overall Rank and provides separate figures for Delhi Region and Outside Delhi Region candidates.
Students should remember that there is no single DTU cutoff rank applicable to every candidate. The closing rank can vary significantly between CSE, Information Technology, Software Engineering, ECE, Electrical Engineering, Mechanical Engineering and other B.Tech branches, as well as between categories and Delhi/Outside Delhi regions.
This article explains DTU cutoff 2026, previous-year cutoff trends, branch-wise closing ranks, category-wise differences, how JAC Delhi cutoff works, how to check the official cutoff, and what students should consider while filling their choices.
What is the DTU cutoff 2026?
The DTU cutoff 2026 is the JEE Main rank at which seats in different B.Tech programmes close during JAC Delhi counselling. The cutoff depends on the branch, category, Delhi or Outside Delhi region, counselling round and seat availability. For example, the official JAC Delhi Round 4 data shows a General-category closing rank of 14,806 for CSE in the Delhi Region and 7,060 for CSE in the Outside Delhi Region. Students should check the latest JAC Delhi opening and closing ranks before selecting their preferences.
DTU Cutoff 2026
Delhi Technological University, commonly known as DTU, is one of the participating institutes in JAC Delhi counselling for B.Tech admissions. JAC Delhi conducts the centralized admission process for participating institutions, and admissions are based on JEE Main ranks.
The term DTU cutoff generally refers to the opening and closing ranks at which seats are allotted in a particular B.Tech branch during a particular counselling round.
A student searching for the DTU cutoff should therefore avoid looking only for one number. The relevant cutoff depends on several factors:
- B.Tech branch
- Candidate category
- Delhi or Outside Delhi region
- Gender or applicable seat category
- Counselling round
- JEE Main rank
- Availability of seats
- Candidate choices
- Seat withdrawal and upgradation
The official JAC Delhi system publishes opening and closing ranks after seat allotment rounds.
What Is DTU Cutoff?
The DTU cutoff is the rank range associated with seats offered by DTU during the JAC Delhi admission process.
Suppose a branch has an opening rank of 5,000 and a closing rank of 15,000 for a particular category and region. This means that seats in that particular counselling category were allotted across that rank range.
The closing rank is particularly useful because it indicates the last recorded rank at which a seat was allotted in that category during the specified round.
However, students should not interpret a previous closing rank as a guaranteed admission rank for the next year.
Cutoffs can change because:
- JEE Main candidate preferences change.
- The number of applicants changes.
- Seat intake can change.
- New programmes may be introduced.
- Category-wise seat distribution can change.
- Students may upgrade or withdraw seats.
- Counselling rules can change.
- Branch preferences can change.
Therefore, previous-year cutoff data is best used as a reference point, not as a guarantee.
DTU Cutoff 2026 Latest Update
The official JAC Delhi website has published DTU cutoff documents for the 2026 admission cycle, including Round 2 and Round 4 cutoff documents.
The official Round 4 document is titled “DTU Round 4 Cut Off 2026” and is based on JEE Main All India Overall Rank. It separately provides cutoff information for Delhi Region and Outside Delhi Region candidates.
This distinction is important because the same DTU branch can have substantially different closing ranks for Delhi and Outside Delhi candidates.
Students should therefore always check the column applicable to their admission category rather than comparing their rank with an unrelated cutoff.
DTU Cutoff 2026: Important Points
Before checking the table, understand these important points:
Cutoff Is Rank-Based
For JAC Delhi B.Tech admissions, the relevant ranking is the JEE Main rank used by the counselling process. JAC Delhi states that admissions are conducted on the basis of ranks obtained in JEE Main conducted by the National Testing Agency.
Every Branch Has a Different Cutoff
CSE, IT, Software Engineering, Mathematics and Computing and other popular programmes generally have different cutoff ranges.
Every Category Has Different Cutoff Data
The official DTU cutoff document contains separate columns for different categories and subcategories.
Delhi and Outside Delhi Cutoffs Are Different
The official Round 4 document contains separate Delhi Region and Outside Delhi Region sections.
Cutoff Changes by Round
A branch may have different opening and closing ranks in Round 1, Round 2, Round 3, Round 4 and later rounds.
DTU Round 4 Cutoff 2026
The official Round 4 DTU cutoff was issued for B.Tech admissions 2026-27 and dated 14 July 2026. The document specifies that the cutoff is based on JEE Main All India Overall Rank.
For the Delhi Region General category, selected Round 4 closing ranks included:
| B.Tech Branch | Delhi Region General Closing Rank |
|---|---|
| Computer Science and Engineering | 14,806 |
| CSE Data Science & Analytics | 16,291 |
| Information Technology | 20,595 |
| IT Cyber Security | 26,382 |
| Software Engineering | 26,336 |
| Mathematics and Computing | 28,082 |
| Electronics & Communication Engineering | 30,467 |
| Electronics Engineering VLSI | 33,512 |
| Electrical Engineering | 44,534 |
| Mechanical Engineering | 57,589 |
| Mechanical & Automation Engineering | 59,598 |
| Automotive Engineering | 63,556 |
| Engineering Physics | 62,903 |
| Chemical Engineering | 74,005 |
| Civil Engineering | 81,143 |
| Production & Industrial Engineering | 75,754 |
| Environmental Engineering | 87,645 |
| Bio-Technology | 88,822 |
These figures are from the official JAC Delhi Round 4 document.
These are closing ranks for a specific category, region and counselling round, so they should not be presented as universal DTU admission cutoffs.
Branch-Wise DTU Cutoff 2026
DTU CSE Cutoff 2026
Computer Science and Engineering is one of the most sought-after B.Tech programmes at DTU.
According to the official JAC Delhi Round 4 cutoff, the Delhi Region General closing rank for DTU CSE was 14,806. For the Outside Delhi Region General category, the corresponding closing rank shown was 7,060.
This illustrates why students must identify their region before comparing their JEE Main rank with DTU cutoff data.
The official document also lists separate ranks for EWS, OBC, SC, ST and applicable subcategories.
What does the CSE cutoff indicate?
It indicates the competitiveness of the CSE seat allotment during that particular round. It does not mean that every candidate with a rank better than the closing rank will automatically receive CSE, because the actual allotment also depends on category, choices, eligibility and availability.
DTU CSE Data Science & Analytics Cutoff
DTU also offers Computer Science and Engineering (Data Science & Analytics).
In Round 4 of JAC Delhi 2026, the Delhi Region General closing rank shown for this programme was 16,291. The Outside Delhi General closing rank shown was 7,148.
The branch can be relevant to students interested in programming, data analysis, machine learning and related computing areas.
However, students should evaluate the complete curriculum and personal career interests instead of selecting a branch solely because of its cutoff.
DTU Information Technology Cutoff 2026
The official Round 4 cutoff lists the Delhi Region General closing rank for Information Technology at 20,595.
For the Outside Delhi Region General category, the closing rank was 9,283.
The IT cutoff should be checked separately from CSE because each programme has its own seat allotment pattern.
Students interested in software development, information systems, programming and technology careers often consider IT along with CSE and Software Engineering while filling their JAC Delhi preferences.
DTU IT Cyber Security Cutoff 2026
DTU's Information Technology (Cyber Security) programme also has a separate cutoff.
The Round 4 Delhi Region General closing rank was 26,382, while the Outside Delhi Region General closing rank was 9,808.
Cybersecurity has become an important technology specialization, covering areas related to secure systems, networks, information security and cyber defence.
Candidates should examine the actual programme structure and available academic resources before finalizing a choice.
DTU Software Engineering Cutoff 2026
For Software Engineering, the official Round 4 Delhi Region General closing rank was 26,336.
The Outside Delhi Region General closing rank was 10,748.
Software Engineering can appeal to students interested in software development, software architecture, testing and engineering methodologies.
When using cutoff data, students should compare their rank with the correct region and category column.
DTU Mathematics and Computing Cutoff 2026
The Mathematics and Computing programme had a Delhi Region General closing rank of 28,082 in Round 4.
The Outside Delhi Region General closing rank was 10,285.
This programme can be relevant to students who enjoy mathematics, algorithms, computation and quantitative problem-solving.
The cutoff alone does not describe the complete academic experience of a programme. Students should review the syllabus and course structure before choosing it.
DTU ECE Cutoff 2026
The Round 4 Delhi Region General closing rank for Electronics and Communication Engineering was 30,467.
For the Outside Delhi Region General category, the closing rank was 10,928.
ECE combines electronics with communication-related engineering concepts and can lead to opportunities across hardware, embedded systems, communication technology and related technical fields.
DTU Electrical Engineering Cutoff 2026
The official Round 4 Delhi Region General closing rank for Electrical Engineering was 44,534.
The Outside Delhi Region General closing rank was 14,522.
Electrical Engineering covers areas such as electrical systems, power, machines, control and related engineering applications.
Students should compare the cutoff with their rank only after identifying their exact category and region.
DTU Mechanical Engineering Cutoff 2026
The Round 4 Delhi Region General closing rank for Mechanical Engineering was 57,589.
For Outside Delhi Region General candidates, the closing rank was 17,230.
Mechanical Engineering covers engineering areas related to machines, manufacturing, design, mechanics and thermal systems.
DTU also has separate programmes such as Mechanical and Automation Engineering and Mechanical Engineering with specialization in Automotive Engineering.
DTU Other Branch Cutoffs 2026
The Round 4 official data also includes several other B.Tech programmes.
| Branch | Delhi Region General Closing Rank | Outside Delhi General Closing Rank |
|---|---|---|
| Mechanical & Automation Engineering | 59,598 | 16,327 |
| Automotive Engineering | 63,556 | 16,843 |
| Engineering Physics | 62,903 | 17,602 |
| Chemical Engineering | 74,005 | 18,609 |
| Civil Engineering | 81,143 | 24,949 |
| Production & Industrial Engineering | 75,754 | 21,794 |
| Environmental Engineering | 87,645 | 23,510 |
| Bio-Technology | 88,822 | 25,303 |
The figures above represent Round 4 General-category closing ranks from the official JAC Delhi document.
Because these are round-specific figures, students should not assume that the same ranks will remain unchanged in future admission cycles.
DTU Cutoff: Delhi Region vs Outside Delhi Region
One of the most important aspects of DTU admission is understanding the distinction between Delhi Region and Outside Delhi Region.
JAC Delhi's official DTU cutoff document explicitly separates these two sections.
This means a student from Delhi and a student from outside Delhi may see very different cutoff ranks for the same branch and category.
For example, in Round 4 2026:
- CSE Delhi Region General: 14,806
- CSE Outside Delhi General: 7,060
- IT Delhi Region General: 20,595
- IT Outside Delhi General: 9,283
- Mechanical Engineering Delhi Region General: 57,589
- Mechanical Engineering Outside Delhi General: 17,230
Therefore, searching for a generic phrase such as "DTU CSE cutoff" without specifying region can lead to confusion.
DTU Cutoff 2026 Category-Wise
JAC Delhi publishes cutoff data for multiple categories and subcategories.
The official Round 4 DTU document includes columns for:
- General
- EWS
- OBC
- SC
- ST
- Applicable subcategories
- Defence/CW categories
- Other specified admission categories
Students should use the cutoff column corresponding to their actual category.
For example, a candidate belonging to OBC should not compare their rank exclusively with the General-category cutoff and assume that the same closing rank applies.
Similarly, candidates under special categories should check the relevant official subcategory.
DTU Cutoff Through JAC Delhi
JAC Delhi is the centralized admission system through which DTU participates in B.Tech admissions.
According to the official JAC Delhi website, participating institutions in the 2026 admission process include DTU, NSUT, IGDTUW, IIIT-Delhi and DSEU.
JAC Delhi states that B.Tech admissions are conducted using JEE Main ranks.
The counselling process involves activities such as:
- Registration
- Choice filling
- Seat allotment
- Seat acceptance
- Document submission
- Willingness submission
- Upgradation, where applicable
- Physical reporting
- Subsequent rounds or special rounds where applicable
JAC Delhi explains that candidates can submit FLOAT for upgradation or FREEZE when they do not want further upgradation, according to the counselling process.
How to Check DTU Cutoff 2026
Students can check the official cutoff by following these steps.
Step 1: Visit JAC Delhi
Open the official JAC Delhi admission portal.
Step 2: Find OR-CR Information
Look for the Opening and Closing Rank section.
Step 3: Select DTU
Choose Delhi Technological University from the available institute information.
Step 4: Select the Relevant Round
Cutoffs are published separately for counselling rounds.
Step 5: Check Your Region
Identify whether you need the Delhi Region or Outside Delhi Region table.
Step 6: Check Your Category
Find the relevant General, EWS, OBC, SC, ST or applicable subcategory column.
Step 7: Find Your Branch
Locate CSE, IT, ECE, EE, Mechanical or the desired programme.
Step 8: Compare the Rank
Compare your JEE Main rank with the appropriate opening and closing ranks.
JAC Delhi states that after each allotment round, institute-wise allotment results and opening and closing ranks are published.
DTU Opening Rank vs Closing Rank
Many students confuse opening rank and closing rank.
Opening Rank
The opening rank represents the starting rank associated with allotments for a particular branch, category, region and round.
Closing Rank
The closing rank represents the last rank associated with an allotment in that particular combination.
For example, if a particular category has:
- Opening rank: 10,000
- Closing rank: 20,000
then the reported allotments fall within that range.
However, these numbers should always be interpreted in the context of the specific counselling round.
A closing rank of 20,000 does not mean that every candidate with a rank better than 20,000 will necessarily receive the branch. Choice filling, category, region, seat availability and counselling rules also matter.
Factors Affecting DTU Cutoff
Several factors can influence the cutoff.
JEE Main Rank Distribution
The performance and rank distribution of candidates participating in counselling affects competition for individual branches.
Branch Preference
Popular branches can attract a high number of preferences.
Category
Different categories have separate seat allocation mechanisms and cutoff figures.
Region
Delhi and Outside Delhi candidates can have different cutoff patterns.
Number of Seats
Changes in available seats can affect closing ranks.
Counselling Round
Cutoffs can move between rounds depending on seat acceptance, upgrades and vacancies.
Candidate Choices
The preferences submitted by candidates influence seat allocation.
Withdrawal and Upgradation
When students move to another branch or institution, seats can become available in subsequent rounds.
DTU Cutoff Previous Year Trends
Previous-year cutoff information is valuable for understanding historical patterns.
For example, JAC Delhi maintains official DTU cutoff documents for the 2025 counselling cycle as well, including Round 1, Round 2, Round 3, Round 4 and later-round information.
Students comparing 2025 and 2026 should ensure that they compare:
- Same branch
- Same category
- Same region
- Same counselling round
- Same type of rank
A Round 1 cutoff from one year should not automatically be compared with a Round 4 cutoff from another year.
How to Use Previous-Year DTU Cutoff
Previous cutoff data can help students create a realistic choice list.
A useful approach is to divide preferences into:
High Preference Choices
Branches where your rank is better than the historical closing rank by a reasonable margin.
Competitive Choices
Branches where your rank is close to historical closing ranks.
Backup Choices
Branches where historical closing ranks suggest that admission may remain possible if seats are available.
This is not a guarantee of admission. It is simply a structured way to organize choices based on historical information.
DTU Cutoff and JEE Main Rank
Students often ask, "What JEE Main rank is required for DTU?"
There is no single answer.
The answer depends on:
- Branch
- Category
- Region
- Round
- Seat availability
- Choice filling
- Admission rules
For instance, the Round 4 2026 General-category Delhi Region closing rank ranged from 14,806 for CSE to 88,822 for Biotechnology among the programmes listed in the official document.
Outside Delhi, the General-category closing ranks also differed considerably across branches.
Therefore, students should search for the specific query that matches their situation, such as:
"DTU CSE cutoff 2026 Delhi General"
rather than simply searching for "DTU cutoff."
What Happens After DTU Cutoff?
A cutoff is not the final step in the admission process.
If a student receives a DTU seat, they generally need to complete the required counselling and admission activities within the prescribed timeline.
JAC Delhi's process includes uploading required documents, submitting willingness and paying the seat acceptance fee. The official instructions state that failure to complete required steps can result in cancellation of the allotted seat.
Students should therefore:
- Check allotment results regularly.
- Download the provisional allotment letter when required.
- Upload documents correctly.
- Pay applicable fees on time.
- Understand FLOAT and FREEZE choices.
- Monitor subsequent rounds.
- Follow physical reporting instructions.
DTU Special Spot Round
JAC Delhi may conduct additional admission rounds when applicable.
For the 2026 admission cycle, JAC Delhi published specific Guidelines for DTU Special Spot Round for B.Tech.
The JAC Delhi website also published notices concerning DTU special spot admissions and updated vacancies.
Students considering a spot round should carefully read the official notice because eligibility, registration, vacancy and seat-allocation conditions can differ from regular rounds.
Tips for DTU Choice Filling
Choice filling is an important part of the admission process.
1. Research Multiple Branches
Do not enter only one branch if you are genuinely open to other programmes.
2. Check Official Cutoffs
Use official JAC Delhi opening and closing ranks as the primary reference.
3. Separate Region and Category
Always compare your rank with the correct column.
4. Use Historical Data
Look at more than one year when available.
5. Understand Your Priorities
Consider academic interests, curriculum, career goals, location and other relevant factors.
6. Don't Treat Cutoff as a Guarantee
A previous cutoff can move in either direction.
7. Track Every Counselling Round
Later rounds can have different vacancy and allotment patterns.
8. Check Official Notices
Admission procedures and dates can change, so use the latest JAC Delhi announcement.
Is DTU Cutoff the Same for Every Branch?
No.
DTU cutoff varies by branch.
CSE, CSE Data Science & Analytics, IT, Cyber Security, Software Engineering, Mathematics and Computing, ECE, Electrical, Mechanical, Civil, Chemical, Biotechnology and other programmes have separate cutoff figures.
The official Round 4 2026 document demonstrates this clearly.
This is why students should never use one DTU cutoff number for all B.Tech programmes.
Is DTU Cutoff the Same for Delhi and Outside Delhi Students?
No.
JAC Delhi publishes separate Delhi Region and Outside Delhi Region cutoff data for DTU.
The difference can be substantial.
For example, the Round 4 General-category CSE closing rank was 14,806 for Delhi Region and 7,060 for Outside Delhi Region.
Students should therefore identify their applicable region before evaluating their admission chances.
Why Does DTU Cutoff Change Every Year?
DTU cutoff can change because admission competition is not fixed.
Important reasons include:
- Changes in JEE Main rank distribution
- Candidate preferences
- Number of applicants
- Seat intake
- Category distribution
- New courses
- Changes in counselling procedure
- Seat upgrades
- Withdrawals
- Vacancies
Consequently, a student should not assume that the 2026 cutoff will remain identical in 2027.
DTU Cutoff vs DTU Admission
These terms are related but different.
DTU cutoff refers to opening and closing rank information.
DTU admission refers to the complete process of obtaining and confirming a seat.
A student can meet a historical cutoff but still need to complete the actual counselling requirements.
Therefore, after checking cutoff information, candidates should follow the current JAC Delhi admission instructions.
Why Official Sources Matter for DTU Cutoff
Cutoff information is highly sensitive to the counselling year and round.
Third-party websites may publish estimated cutoffs, predicted cutoffs or historical figures. Such information can be useful for general understanding, but students should verify actual admission data against official JAC Delhi documents.
The official JAC Delhi portal publishes DTU cutoff documents and counselling information.
For example, the official 2026 Round 4 PDF identifies itself as DTU B.Tech Admissions 2026-27 and gives the date, ranking basis and category-wise tables.
DTU Cutoff 2026 — Quick Summary
Here is a quick overview based on the official Round 4 General-category figures.
| Branch | Delhi Region | Outside Delhi Region |
|---|---|---|
| CSE | 14,806 | 7,060 |
| CSE Data Science & Analytics | 16,291 | 7,148 |
| IT | 20,595 | 9,283 |
| IT Cyber Security | 26,382 | 9,808 |
| Software Engineering | 26,336 | 10,748 |
| Mathematics & Computing | 28,082 | 10,285 |
| ECE | 30,467 | 10,928 |
| VLSI | 33,512 | 12,043 |
| Electrical Engineering | 44,534 | 14,522 |
| Mechanical Engineering | 57,589 | 17,230 |
| Civil Engineering | 81,143 | 24,949 |
| Biotechnology | 88,822 | 25,303 |
Source: JAC Delhi official DTU Round 4 Cut Off 2026.
Note: These are selected General-category Round 4 closing ranks and should not be interpreted as universal or guaranteed admission thresholds.
How CampusWale Can Help Students
Students researching DTU admission usually have several questions beyond the cutoff.
They may also want information about:
- JEE Main admission
- JAC Delhi counselling
- DTU branches
- DTU courses
- DTU fees
- DTU placements
- DTU hostel information
- DTU syllabus
- DTU admission dates
- DTU cutoff trends
- NSUT vs DTU
- Engineering college alternatives
CampusWale can be used as an education-information resource for students researching colleges, courses, entrance exams, admission procedures and cutoff-related topics.
Before making an admission decision, students should cross-check important dates, eligibility requirements, seat availability and official cutoff information with the relevant official admission authority.
DTU Cutoff 2026 FAQs
FAQ 1: What is the DTU cutoff 2026?
DTU cutoff 2026 refers to the opening and closing JEE Main ranks at which B.Tech seats are allotted at Delhi Technological University through JAC Delhi counselling. The cutoff varies by branch, category, region and counselling round.
FAQ 2: What was the DTU CSE cutoff 2026?
In JAC Delhi Round 4 2026, the General-category CSE closing rank was 14,806 for the Delhi Region and 7,060 for the Outside Delhi Region.
FAQ 3: What is the DTU cutoff for IT?
In Round 4 2026, the General-category IT closing rank was 20,595 for Delhi Region and 9,283 for Outside Delhi Region.
FAQ 4: Is DTU cutoff different for Delhi and Outside Delhi students?
Yes. The official DTU cutoff document separately reports Delhi Region and Outside Delhi Region ranks.
FAQ 5: Which exam is used for DTU B.Tech admission?
JAC Delhi states that B.Tech admissions are conducted based on ranks obtained in JEE Main.
FAQ 6: Does DTU have different cutoffs for different categories?
Yes. Official cutoff documents provide separate columns for categories and applicable subcategories.
FAQ 7: Can I get DTU with a high JEE Main rank?
Admission depends on the particular branch, category, region, counselling round and seat availability. Students should compare their rank with the appropriate official opening and closing rank.
FAQ 8: Does DTU cutoff change every counselling round?
Yes. JAC Delhi publishes opening and closing ranks for individual allotment rounds, and cutoff figures can change as seats are allotted, upgraded or become vacant.
FAQ 9: Where can I check the official DTU cutoff?
The official DTU cutoff can be checked through the JAC Delhi opening and closing rank section and its published DTU cutoff documents.
FAQ 10: Is previous-year DTU cutoff useful?
Yes. Previous-year cutoff data can help students understand historical admission patterns, but it should not be treated as a guaranteed cutoff for a future admission cycle.
Conclusion — DTU Cutoff 2026
The DTU Cutoff 2026 provides an important reference for students planning B.Tech admission through JAC Delhi. However, the cutoff should always be interpreted in the correct context.
The most important variables are JEE Main rank, branch, category, Delhi/Outside Delhi region and counselling round.
The official JAC Delhi Round 4 data shows that DTU's General-category closing ranks differed considerably across branches. For Delhi Region candidates, the listed closing rank was 14,806 for CSE and 88,822 for Biotechnology, while Outside Delhi General closing ranks ranged from 7,060 for CSE to 25,303 for Biotechnology among the branches shown in the official table.
Students should not make admission decisions solely from a single cutoff number. Instead, compare your rank with the appropriate category and region, review multiple branches, understand the counselling process and keep track of official JAC Delhi announcements.
For regular updates and easy-to-understand education information, students can explore CampusWale for additional guidance on entrance examinations, college admissions, courses, cutoff information and related educational topics.
If you are preparing for DTU admission, start by checking your JEE Main rank, identify your applicable category and region, review the latest JAC Delhi cutoff, and prepare your choice list carefully. Always verify final admission details from official sources before completing the admission process.